Skip to content
Original design · developed in IndiaKozhikode consultations · by appointmentDelivery across Kerala and IndiaUAE commissions · by project
AUTHË
OBJECTS · ART · FURNITURE
Kozhikode · India · UAESearchAccount
Aster Sling Lounge in a light Kerala interior · AUTHË v2 panoramic header design visualisation
WorkAster Sling Lounge
TypeLounge Seating
Standard dimensionsProposed 960 W × 900 D × 800 H mm · target seat height 420 mm.
Order start Refundable advance Rs. 2,85,000
Lounge Seating · AUTHË Advance order

Aster Sling Lounge

Site-specific scopeReserve with Rs. 2,85,000 fully refundable advance

Aster is a low lounge concept defined by two crescent timber side frames, three separate cushions and four visible leather suspension straps. A sculpted keel supports the seat while small bronze caps mark the strap joints.

The current images are design visualisations. Timber, leather, cushion construction and dimensions are proposed. A full-scale seating prototype must confirm entry clearance, seat height, back angle, strap stretch, joint loads, edge comfort and floor stability before production.

Each approved commission is planned to be hand-finished for one client. Timber tone, leather colour and bronze patina are reviewed from physical samples; a discreet AUTHË engraving is proposed on the rear underside of the keel. Grain and hide variation keep each completed chair individual.

Choose an option
Smoked ash / natural leather Rs. 2,25,000 advance Indian walnut / oxblood leather Rs. 2,85,000 advance
Delivery

Custom crating, insured freight and installation quoted to destination

Lead time

Quoted after prototype, comfort review and material approval.

Documentation

Signed record, approved drawings, operating guide and maintenance plan

Studio price

Design development, the selected standard configuration, approved studio material and finish, hardware, workshop assembly, inspection and signed handover record.

Project price

Site-specific structural engineering, custom crates, insured freight, taxes and duties, rigging, installation and final calibration.

Technical dossier
Dimensions
Proposed 960 W × 900 D × 800 H mm · target seat height 420 mm.
Use and operation
Target seat height is 410–430 mm with open side entry, rounded hand and leg contact edges and removable cushion/strap assemblies. Seat pitch, arm height, back angle, sling stretch, joint strength and floor stability require full-scale ergonomic testing.
Materials
Proposed smoked ash or Indian walnut, aniline leather, cushion substrate and foam, and aged-bronze joint caps.
Motion
Static furniture.
Power
Not required.
Edition
Made-to-order concept · full-scale seating prototype pending.
Installation
Freestanding; footprint, floor glides and safe lifting points require prototype review.
Series
Lounge Seating
Made in
Developed in India · production origin confirmed in proposal
Documentation
Studio-signed project record, approved drawing set, configuration schedule, operating guide and maintenance plan
Modular construction
Proposed removable cushion and strap assemblies for repair and reupholstery.
Packing and assembly
Frame and removable soft components packed separately; final crate size and weight require prototype validation.
Installation and ownership
Configuration and site review

The selected scale is the starting configuration. Final dimensions, structure, clearances, finish, movement and controls are confirmed against site drawings before fabrication.

Power and controls

Not required. Power location, switching, control integration and cable routes are shown in the approved project drawings.

Installation

Freestanding; footprint, floor glides and safe lifting points require prototype review. Structural capacity and local compliance remain subject to review by the project team.

Shipping and field assembly

Frame and removable soft components packed separately; final crate size and weight require prototype validation. Freight is quoted after crate size, weight, destination, insurance and access are confirmed.

Service and replacement parts

Removable covers, serviceable hardware and reversible connections are planned wherever the approved design allows. The final handover identifies care, adjustment and replaceable parts for the actual piece.

Aster Sling Lounge · AUTHË v2 canonical studio design view
Aster Sling Lounge · AUTHË v2 front elevation design view
Aster Sling Lounge · AUTHË v2 rear construction study
Aster Sling Lounge · AUTHË v2 human-scale ergonomic study
Aster Sling Lounge · AUTHË v2 proposed strap and bronze joint detail
Technical drawing · concept issue 01

Aster Sling Lounge · technical outline

Standard commission envelope shown. Final dimensions, loads, fixings, power, service clearances, module breaks and crate sizes are issued after site review.

Aster Sling Lounge · AUTHË v2 dimension drawing · concept issue

Specifications

Dimensions
Proposed 960 W × 900 D × 800 H mm · target seat height 420 mm.
Use and operation
Target seat height is 410–430 mm with open side entry, rounded hand and leg contact edges and removable cushion/strap assemblies. Seat pitch, arm height, back angle, sling stretch, joint strength and floor stability require full-scale ergonomic testing.
Materials
Proposed smoked ash or Indian walnut, aniline leather, cushion substrate and foam, and aged-bronze joint caps.
Movement
Static furniture.
Power
Not required.
Installation
Freestanding; footprint, floor glides and safe lifting points require prototype review.
Edition
Made-to-order concept · full-scale seating prototype pending.
Lead time
Quoted after prototype, comfort review and material approval.
Modular construction
Proposed removable cushion and strap assemblies for repair and reupholstery.
Packing and delivery
Frame and removable soft components packed separately; final crate size and weight require prototype validation.
Made in
Developed in India · production origin confirmed in proposal
Drawing

Related works